Schluter products are available in our Burnaby branch only.
Website: www.schluter.ca
The trademarks of Schluter® Systems are the exclusive property rights of Schluter Systems (Canada), Inc., its
affiliates and subsidiaries and any commercial use is restricted except as permitted by law.
|
|
|
sf/roll |
pcs/pallet |
lbs/box |
suggested list price |
DITRA-30 |
3'3"x98.5' Ditra uncoupling & waterproof membrane
| 323 | n/a |
n/a |
$2.29/sf |
Schluter DITRA is a polyethylene membrane with square, dovetailed recesses and an anchoring fleece laminated to its underside. In conjunction with tiled coverings, Schluter DITRA forms an uncoupling, waterproofing, and vapour pressure equalization layer.
|
|
|
|
suggested list price |
SC-KEBA100/125 |
5"x98.5" Schluter® KERDI-BAND [Sold by LINEAR FOOT - (98.5 LF/roll) 125mm (5") Width - 4mil Thick]
|
$1.33/lf |
SC-KEBA100/125/5M |
5"x16.5" Schluter® KERDI-BAND [Sold by FULL ROLL ONLY - 125mm (5") Width - 4mil Thick]
|
$27.94/roll |
SC-KEBA100/125/10M |
5"x33" Schluter® KERDI-BAND [Sold by FULL ROLL ONLY - 125mm (5") Width - 4mil Thick]
|
$53.08/roll |
Schluter Keba is a waterproofing strip used to seal butt joints and floor/wall connections with the Schluter Kerdi and Schluter Ditra mattings.
|
|
|
|
sf/roll |
suggested list price |
DITRA-XL |
3'3"x53" Ditra uncoupling & waterproof membrane
| 175 |
$2.64/sf |
Schluter-DITRA-XL is the latest innovation in uncoupling membranes. It provides the same 4 essential functions as Schluter-DITRA (uncoupling, waterproofing, vapor management, & support/load distribution), but is 5/16" (7 mm) thick, allowing for even transitions between ceramic tile & 3/4" (19 mm) -thick hardwood flooring & ceramic tile application on single-layer wood subfloors on joists spaced at 24" (610 mm) o.c.
|
|
|
|
sf/roll |
suggested list price |
SC-DDRAIN25M |
Ditra Drain 25M
| 270 |
$3.05/sf |
Schlüter®-DITRA-DRAIN is a safe and permanently effective passive capillary drainage system for fl oor assemblies. The material is installed using the thin-bed method over a sloped waterproofi ng assembly, such as those produced with Schlüter®-KERDI. It consists of a closed polyethylene mat that on one side features approx. 4 mm high, conical studs with a laminated filter fleece fabric.
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-KD2FLKABS |
Kerdi ABS Flange Kit - 2"
|
$96.60 |
SC-KD2FLKABS10 |
Kerdi ABS Flange Kit - 2" [10 Pack]
|
$842.38 |
SC-KD3FLKABS |
Kerdi ABS Flange Kit - 3"
|
$105.81 |
Kerdi Drain- Flange Kits
Each Kit Includes The Following Material:
- 4x Kerdi Inside Corners
- 2x Kerdi Outside Corners
- 1x 3/4" [20mm] Kerdi Pipe Seal
- 1x 4-1/2" [114mm] Kerdi Mixing Valve Seal
*10 Pack 2" Flange Kit - Comes in BULK, not individually packed, and comes with:
- 40x Kerdi Inside Corners
- 20x Kerdi Outside Corners
- 10x 3/4" [20mm] Kerdi Pipe Seal
- 10x 4-1/2" [114mm] Kerdi Mixing Valve Seal
Note: Kerdi Drain Style Grates are SOLD SEPARATELY 2" Flange Kits to be used with 4" [100mm] grates 3" Flange Kits to be used with 6" [150mm] grates
|
|
|
|
suggested list price |
SC-KD4GRKE |
Kerdi Drain Grate Kit - Stainless Steel 4"
|
$66.61 |
SC-KD4GRKE10 |
Kerdi Drain Grate Kit - Stainless Steel 4" [10 Pack]
|
$599.47 |
SC-KD4GRKEP |
Kerdi Drain Grate Kit - Chrome 4"
|
$66.61 |
SC-KD4GRKECS |
Kerdi Drain Grate Kit - Tileable 4"
|
$66.61 |
SC-KD4GRKAKGB |
Kerdi Drain Grate Kit - Brushed Copper 4"
|
$90.08 |
SC-KD4GRKAMGB |
Kerdi Drain Grate Kit - Brushed Brass 4"
|
$90.08 |
SC-KD4GRKATGB |
Kerdi Drain Grate Kit - Brushed Nickel 4"
|
$90.08 |
SC-KD4GRKEOB |
Kerdi Drain Kit - Oil Rubbed Bronze 4"
|
$90.08 |
SC-KDIF4GRKMGSD8 |
Kerdi Drain Grate Kit - Matte Black [Pure] 4"
|
$182.24 |
SC-KDIF4GRKMGSD6 |
Kerdi Drain Grate Kit - Matte Black [Curve] 4"
|
$182.24 |
SC-KDIF4GRKMGSD5 |
Kerdi Drain Grate Kit - Matte Black [Floral] 4"
|
$182.24 |
SC-KD6GRKE |
Kerdi Drain Grate Kit - Stainless Steel 6"
|
$86.11 |
Kerdi Drain- Grate Kits
Each Kit Includes The Following Material:
- 1x Grate & Frame
- 1x Height Adjustment Collar
- 1x Lateral Adjustment Ring
4" Grates to be used with the 2" Kerdi Flange Kits, or Shower Kits sold with 2" flanges. Both are sold separately.
6" Grates to be used with either the 2" or 3" Flange Kits or Shower Kits sold with 2" flanges. Both are sold separately.
|
The Schluter®-KERDI-SHOWER-KIT contains the following material below.
*Kerdi-Drain Grates are required, and sold separately.
- 1x Kerdi-Shower-T/-TS/-TT Shower Tray
- 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
- 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
- 1x Kerdi-Band Waterproofing Strip 5"x33'
- 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
- 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
- 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
- 1x Kerdi-Seal-PS Pipe Seal [3/4" - 20mm]
- 1x Kerdi-Seal-MV Mixing Valve Seal
***COMPLETE SHOWER KITS (W/GRATE) ALSO STOCKED***
- SC-KSK1220ABSE [48x48]
- SC-KSK9651525ABSE [38x60 Center]
- SC-KSK9651525SE [38x60 Off-Set]
|
|
|
suggested list price |
SC-KSK9651525ABS |
SHOWER KIT: 38x60 (ABS Flange, Center Drain)
|
$700.67 |
Each kit includes the following material: - 1x Kerdi-Shower-T/-TS/-TT Shower Tray
- 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
- 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
- 1x Kerdi-Band Waterproofing Strip 5"x33'
- 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
- 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
- 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
- 1x Kerdi-Seal-PS Pipe Seal [3/4" - 20mm]
- 1x Kerdi-Seal-MV Mixing Valve Seal
|
|
|
|
suggested list price |
SC-KSK9651525SABS |
SHOWER KIT: 38x60 (ABS Flange, Offset Drain)
|
$700.67 |
Each kit includes the following material: - 1x Kerdi-Shower-T/-TS/-TT Shower Tray
- 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
- 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
- 1x Kerdi-Band Waterproofing Strip 5"x33'
- 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
- 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
- 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
- 1x Kerdi-Seal-PS Pipe Seal [3/4" - 20mm]
- 1x Kerdi-Seal-MV Mixing Valve Seal
|
|
|
|
suggested list price |
SC-KSK1220ABS |
SHOWER KIT: 48x48 (ABS Flange, Center Drain)
|
$644.51 |
Each kit includes the following material: - 1x Kerdi-Shower-T/-TS/-TT Shower Tray
- 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
- 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
- 1x Kerdi-Band Waterproofing Strip 5"x33'
- 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
- 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
- 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
- 1x Kerdi-Seal-PS Pipe Seal [3/4" - 20mm]
- 1x Kerdi-Seal-MV Mixing Valve Seal
|
|
|
|
suggested list price |
SC-KSK12201830ABS |
SHOWER KIT: 48x72 (ABS Flange, Center Drain)
|
$957.08 |
Each kit includes the following material: - 1x Kerdi-Shower-T/-TS/-TT Shower Tray
- 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
- 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
- 1x Kerdi-Band Waterproofing Strip 5"x33'
- 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
- 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
- 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
- 1x Kerdi-Seal-PS Pipe Seal [3/4" - 20mm]
- 1x Kerdi-Seal-MV Mixing Valve Seal
|
|
|
|
suggested list price |
SC-KSK12201830PVC |
SHOWER KIT: 48x72 (PVC Flange, Center Drain)
|
$957.08 |
Each kit includes the following material: - 1x Kerdi-Shower-T/-TS/-TT Shower Tray
- 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
- 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
- 1x Kerdi-Band Waterproofing Strip 5"x33'
- 1x Kerdi-Drain-Flange, PVCFlange w/2" [50mm] Outlet
- 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
- 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
- 1x Kerdi-Seal-PS Pipe Seal [3/4" - 20mm]
- 1x Kerdi-Seal-MV Mixing Valve Seal
|
|
|
|
suggested list price |
SC-KSK1830ABS |
SHOWER KIT: 72x72 (ABS Flange, Center Drain)
|
$1185.77 |
Each kit includes the following material: - 1x Kerdi-Shower-T/-TS/-TT Shower Tray
- 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
- 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
- 1x Kerdi-Band Waterproofing Strip 5"x33'
- 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
- 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
- 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
- 1x Kerdi-Seal-PS Pipe Seal [3/4" - 20mm]
- 1x Kerdi-Seal-MV Mixing Valve Seal
|
Schluter®-KERDI-SHOWER-LT/-LTS are polystyrene sloped trays with integrated Schluter®-KERDI waterproofing. Each of these prefabricated shower trays is designed to integrate with the Schluter®- KERDI-LINE. The KERDI-SHOWER-LT allows for the installation of a center drain.
Schluter®-KERDI-SHOWER-T/-TS/-TT are sloped shower trays with integrated KERDI waterproofing. The trays are made of lightweight, expanded polystyrene (PS 40) for constructing mortar-free shower bases. Each of these prefabricated shower trays is designed to integrate with the Schluter®-KERDI-DRAIN.
Website: www.schluter.ca
|
|
|
suggested list price |
SC-KST965/1525 |
Kerdi Shower Tray T - 38x60 [Center Drain]
|
$177.10 |
SC-KST1220/1525 |
Kerdi Shower Tray T - 48x60 [Center Drain]
|
$266.04 |
SC-KST1220/1830 |
Kerdi Shower Tray T - 48x72 [Center Drain]
|
$271.57 |
SC-KST1525 |
Kerdi Shower Tray T - 60x60 [Center Drain]
|
$349.63 |
SC-KST1830 |
Kerdi Shower Tray T - 72x72 [Center Drain]
|
$375.99 |
SC-KST965BF |
Kerdi Shower Tray TT - 38x38 [Center Drain]
|
$142.60 |
SC-KST1220BF |
Kerdi Shower Tray TT - 48x48 [Center Drain]
|
$168.14 |
SC-KST965/1525S |
Kerdi Shower Tray TS - 38x60 [Center Drain]
|
$177.10 |
Schluter®-KERDI-SHOWER-T/-TS/-TT are sloped shower trays with integrated KERDI waterproofing. The trays are made of lightweight, expanded polystyrene (PS 40) for constructing mortar-free shower bases. Each of these prefabricated shower trays is designed to integrate with the Schluter®-KERDI-DRAIN.
|
|
|
|
suggested list price |
SC-KSLT1220S |
Kerdi Shower Tray LTS - 48x48 [Perimeter Drain]
|
$305.51 |
SC-KSLT1930/965S |
Kerdi Shower Tray LTS - 38x76 [Perimeter Drain-Long Side]
|
$397.12 |
SC-KSLT965/1930S |
Kerdi Shower Tray LTS - 38x76 [Perimeter Drain-Short Side]
|
$397.12 |
SC-KSLT915/1830S |
Kerdi Shower Tray LTS - 36x72 [Perimeter Drain]
|
$360.49 |
SC-KSLT915/1395S |
Kerdi Shower Tray LTS - 36x55 [Perimeter Drain]
|
$318.08 |
SC-KSLT1220 |
Kerdi Shower Tray LT - 48x48 [Center Drain]
|
$305.51 |
SC-KSLT1395S |
Kerdi Shower Tray LTS - 55x55 [Perimeter Drain]
|
$384.95 |
SC-KSLT1000S |
Kerdi Shower Tray LTS - 39x39 [Perimeter Drain]
|
$229.07 |
SC-KSLT1395 |
Kerdi Shower Tray LT - 55x55 [Center Drain]
|
$384.95 |
SC-KSLT1000 |
Kerdi Shower Tray LT - 39x39 [Center Drain]
|
$229.07 |
Schluter®-KERDI-SHOWER-LT/-LTS are polystyrene sloped trays with integrated Schluter®-KERDIwaterproofing. Each of these prefabricated shower trays is designed to integrate with the Schluter®- KERDI-LINE. The KERDI-SHOWER-LT allows for the installation of a center drain.
FOR USE WITH KERDI LINE CHANNEL BODIES & GRATES, WHICH ARE SOLD SEPARATELY.
|
|
|
|
suggested list price |
SC-KBSC1151501220 |
WATERPROOF SHOWER CURB: Prefabricated w/Kerdi Board (48"x6"x4.5")
|
$87.63 |
SC-KBSC1151501524 |
WATERPROOF SHOWER CURB: Prefabricated w/Kerdi Board (60"x6"x4.5")
|
$125.97 |
Schluter®-KERDI-SHOWER-SC is a
lightweight, prefabricated shower curb specifically designed to integrate with
the Schluter®-Shower System.
- Designed to integrate with the
Schluter®-Shower System
- Load-bearing to accommodate the
weight of glass blocks, shower doors, and glass partitions
- The height and length of the
shower curb can be easily cut to size; multiple curbs can also be installed
adjacent to each other for larger showers
- Quick and easy to install
- Made of lightweight, expanded
polystyrene
|
Please Note:
To be used with KERDI OUTLET CHANNEL BODIES, which are NOT included and sold separately.
Closed & Perforated Grates - work with both centered and offset channel bodies. Tileable Grates - for use with center outlet channel bodies only.
Grate Assembly:
3/4" [19mm] Frame Height for 1/8" to 9/16" [3mm - 15mm] Thick Coverings.
Comes With:
- 1x Grate [Design Of Your Choice]
- 1x Grate Frame w/ Height Adjustment Spacer
|
|
|
suggested list price |
SC-KL1AR19EB50 |
Kerdi Line - 20" Closed Grate
|
$351.51 |
SC-KL1AR19EB60 |
Kerdi Line - 24" Closed Grate
|
$362.61 |
SC-KL1AR19EB70 |
Kerdi Line - 28" Closed Grate
|
$377.51 |
SC-KL1AR19EB80 |
Kerdi Line - 32" Closed Grate
|
$387.27 |
SC-KL1AR19EB90 |
Kerdi Line - 35" Closed Grate
|
$405.47 |
SC-KL1AR19EB100 |
Kerdi Line - 39" Closed Grate
|
$429.72 |
SC-KL1AR19EB110 |
Kerdi Line - 43" Closed Grate
|
$440.29 |
SC-KL1AR19EB120 |
Kerdi Line - 47" Closed Grate
|
$448.25 |
SC-KL1AR19EB130 |
Kerdi Line - 51" Closed Grate
|
$584.41 |
SC-KL1AR19EB140 |
Kerdi Line - 55" Closed Grate
|
$613.70 |
SC-KL1AR19EB150 |
Kerdi Line - 59" Closed Grate
|
$645.86 |
SC-KL1AR19EB160 |
Kerdi Line - 63" Closed Grate
|
$687.65 |
SC-KL1AR19EB170 |
Kerdi Line - 67" Closed Grate
|
$716.91 |
SC-KL1AR19EB180 |
Kerdi Line - 71" Closed Grate
|
$757.97 |
SC-KL1AR19MGS50 |
Kerdi Line - 20" Solid Grate - Matte Black
|
$393.42 |
SC-KL1AR19MGS60 |
Kerdi Line - 24" Solid Grate - Matte Black
|
$404.70 |
SC-KL1AR19MGS70 |
Kerdi Line - 28" Solid Grate - Matte Black
|
$421.32 |
SC-KL1AR19MGS80 |
Kerdi Line - 32" Solid Grate - Matte Black
|
$432.22 |
SC-KL1AR19MGS90 |
Kerdi Line - 35" Solid Grate - Matte Black
|
$452.54 |
SC-KL1AR19MGS100 |
Kerdi Line - 39" Solid Grate - Matte Black
|
$479.60 |
SC-KL1AR19MGS110 |
Kerdi Line - 43" Solid Grate - Matte Black
|
$491.39 |
SC-KL1AR19MGS120 |
Kerdi Line - 47" Solid Grate - Matte Black
|
$500.27 |
SC-KL1AR19MGS130 |
Kerdi Line - 51" Solid Grate - Matte Black
|
$652.25 |
SC-KL1AR19MGS140 |
Kerdi Line - 55" Solid Grate - Matte Black
|
$684.95 |
SC-KL1AR19MGS150 |
Kerdi Line - 59" Solid Grate - Matte Black
|
$720.83 |
SC-KL1AR19MGS160 |
Kerdi Line - 63" Solid Grate - Matte Black
|
$767.46 |
SC-KL1AR19MGS170 |
Kerdi Line - 67" Solid Grate - Matte Black
|
$800.13 |
SC-KL1AR19MGS180 |
Kerdi Line - 71" Solid Grate - Matte Black
|
$845.96 |
|
|
|
|
suggested list price |
SC-KL1B19EB50 |
Kerdi Line - 20" Perforated Grate
|
$320.79 |
SC-KL1B19EB60 |
Kerdi Line - 24" Perforated Grate
|
$326.92 |
SC-KL1B19EB70 |
Kerdi Line - 28" Perforated Grate
|
$344.98 |
SC-KL1B19EB80 |
Kerdi Line - 32" Perforated Grate
|
$351.25 |
SC-KL1B19EB90 |
Kerdi Line - 35" Perforated Grate
|
$370.37 |
SC-KL1B19EB100 |
Kerdi Line - 39" Perforated Grate
|
$381.07 |
SC-KL1B19EB110 |
Kerdi Line - 43" Perforated Grate
|
$394.72 |
SC-KL1B19EB120 |
Kerdi Line - 47" Perforated Grate
|
$402.20 |
SC-KL1B19EB130 |
Kerdi Line - 51" Perforated Grate
|
$584.41 |
SC-KL1B19EB140 |
Kerdi Line - 55" Perforated Grate
|
$613.70 |
SC-KL1B19EB150 |
Kerdi Line - 59" Perforated Grate
|
$645.86 |
SC-KL1B19EB160 |
Kerdi Line - 63" Perforated Grate
|
$687.65 |
SC-KL1B19EB170 |
Kerdi Line - 67" Perforated Grate
|
$716.91 |
SC-KL1B19EB180 |
Kerdi Line - 71" Perforated Grate
|
$757.97 |
SC-KL1B19MGS50 |
Kerdi Line - 20" Square Grate - Matte Black
|
$358.03 |
SC-KL1B19MGS60 |
Kerdi Line - 24" Square Grate - Matte Black
|
$364.86 |
SC-KL1B19MGS70 |
Kerdi Line - 28" Square Grate - Matte Black
|
$385.02 |
SC-KL1B19MGS80 |
Kerdi Line - 32" Square Grate - Matte Black
|
$392.02 |
SC-KL1B19MGS90 |
Kerdi Line - 35" Square Grate - Matte Black
|
$413.36 |
SC-KL1B19MGS100 |
Kerdi Line - 39" Square Grate - Matte Black
|
$425.30 |
SC-KL1B19MGS110 |
Kerdi Line - 43" Square Grate - Matte Black
|
$440.53 |
SC-KL1B19MGS120 |
Kerdi Line - 47" Square Grate - Matte Black
|
$448.89 |
SC-KL1B19MGS130 |
Kerdi Line - 51" Square Grate - Matte Black
|
$652.25 |
SC-KL1B19MGS140 |
Kerdi Line - 55" Square Grate - Matte Black
|
$684.95 |
SC-KL1B19MGS150 |
Kerdi Line - 59" Square Grate - Matte Black
|
$720.83 |
SC-KL1B19MGS160 |
Kerdi Line - 63" Square Grate - Matte Black
|
$767.46 |
SC-KL1B19MGS170 |
Kerdi Line - 67" Square Grate - Matte Black
|
$800.13 |
SC-KL1B19MGS180 |
Kerdi Line - 71" Square Grate - Matte Black
|
$845.96 |
|
|
|
|
suggested list price |
SC-KL1DRE50 |
Kerdi Line - 20" Tileable Grate
|
$163.21 |
SC-KL1DRE60 |
Kerdi Line - 24" Tileable Grate
|
$171.15 |
SC-KL1DRE70 |
Kerdi Line - 28" Tileable Grate
|
$179.08 |
SC-KL1DRE80 |
Kerdi Line - 32" Tileable Grate
|
$187.02 |
SC-KL1DRE90 |
Kerdi Line - 35" Tileable Grate
|
$200.52 |
SC-KL1DRE100 |
Kerdi Line - 39" Tileable Grate
|
$223.01 |
SC-KL1DRE110 |
Kerdi Line - 43" Tileable Grate
|
$230.90 |
SC-KL1DRE120 |
Kerdi Line - 47" Tileable Grate
|
$238.77 |
SC-KL1DRE130 |
Kerdi Line - 51" Tileable Grate
|
$287.93 |
SC-KL1DRE140 |
Kerdi Line - 55" Tileable Grate
|
$290.40 |
SC-KL1DRE150 |
Kerdi Line - 59" Tileable Grate
|
$293.37 |
SC-KL1DRE160 |
Kerdi Line - 63" Tileable Grate
|
$322.23 |
SC-KL1DRE170 |
Kerdi Line - 67" Tileable Grate
|
$325.42 |
SC-KL1DRE180 |
Kerdi Line - 71" Tileable Grate
|
$328.08 |
SC-KL1DROE70 |
Kerdi Line - 28" Tileable Grate OFFSET
|
$179.08 |
SC-KL1DROE80 |
Kerdi Line - 32" Tileable Grate OFFSET
|
$187.02 |
SC-KL1DROE90 |
Kerdi Line - 35" Tileable Grate OFFSET
|
$200.52 |
SC-KL1DROE100 |
Kerdi Line - 39" Tileable Grate OFFSET
|
$223.01 |
SC-KL1DROE110 |
Kerdi Line - 43" Tileable Grate OFFSET
|
$230.90 |
SC-KL1DROE120 |
Kerdi Line - 47" Tileable Grate OFFSET
|
$238.77 |
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-KB12SN305152A |
KERDI NICHE: 12"x6"
|
$72.00 |
SC-KB12SN305305A |
KERDI NICHE: 12"x12"
|
$86.23 |
SC-KB12SN305508A1 |
KERDI NICHE: 12"x20"
|
$116.55 |
SC-KB12SN305711A1 |
KERDI NICHE: 12"x28"
|
$139.32 |
Schluter®-KERDI-BOARD-SN is a
prefabricated shower niche that is fully sealed, quick to install, and
integrates with KERDI and KERDI-BOARD shower assemblies. The larger niche sizes
include a KERDI-BOARD shelf that can be installed at any height to create
separate compartments within the niche.
- Fully waterproof and vapor-tight
- Features sealed inside corners
for effective waterproofing
- To enhance its appearance, frame
the niche using select Schluter® profiles
- Larger sizes include a
prefabricated, adjustable KERDI-BOARD shelf
- Available in four different sizes
|
|
|
|
suggested list price |
SC-KBSB410TA |
KERDI BENCH: Triangular (16"Wx16"Lx20"H)
|
$216.16 |
SC-KBSB610TA |
KERDI BENCH: Triangular (24"Wx24"Lx20"H)
|
$289.38 |
SC-KBSB290970RA |
KERDI BENCH: Rectangular (38"Wx11.5"Lx20"H)
|
$358.83 |
SC-KBSB4101220RA |
KERDI BENCH: Rectangular (48"Wx16"Lx20"H)
|
$473.42 |
Schluter®-KERDI-BOARD-SB is a
lightweight, waterproof, prefabricated shower bench made of KERDI-BOARD that is
designed to integrate with the Schluter®-Shower System.
- Designed to integrate with the
Schluter®-Shower System
- Lightweight, stable, and load
bearing
- Waterproof and ready to tile
- Sloped surface to prevent water
accumulation
- Quick and easy to install
- The triangular bench includes
preformed 135° KERDI-KERECK inside corners, as well as right and left
KERDI-KERS-B bench corners to simplify waterproofing connections at the wall
- The rectangular bench includes 2
of each preformed 90° inside and outside KERDI-KERECK corners to simplify
waterproofing connections at the wall
|
|
|
|
suggested list price |
SC-KB19/625/2440 |
KERDI BOARD: 24-1/2"x96"x3/4"
|
$76.24 |
SC-KB5/1220/1625 |
KERDI BOARD: 48"x64"x3 1/6"
|
$84.70 |
SC-KB9/1220/1625 |
KERDI BOARD: 48"x64"x3/8"
|
$88.86 |
SC-KB12/1220/1625 |
KERDI BOARD: 48"x64"x1/2"
|
$92.99 |
SC-KB12/1220/2440 |
KERDI BOARD: 48"x96"x1/2"
|
$139.46 |
Schluter®-KERDI-BOARD is a
multifunctional tile substrate and building panel, which can also be used in
bonded waterproofing assemblies with tile. KERDI-BOARD allows you to quickly
and easily build tile-ready elements in showers, bathtub surrounds and platforms,
countertops, vanities, shelving, and more!
- Fosters creativity in the
construction of bonded waterproofing assemblies to be tiled
- Build custom vanities, shelving
units, countertops, bathtub surrounds, and so much more
- Replaces other suitable solid backing
panels (i.e. gypsum board, cement backer board)
- Even, impact-resistant, and rigid
- Waterproof, thermally insulating
and dimensionally stable
- Lightweight, easy to handle and
transport
- Contains no cement or fiberglass
for a dust-free installation
- Extruded polystyrene foam panel
- Fleece webbing for effective
bonding of tile to the surface
|
|
|
|
suggested list price |
SC-KBZT32Z |
KERDI BOARD: Washers 1-1/4" (100/pack)
|
$13.83 |
SC-KBZS55G |
KERDI BOARD: Course Thread Screw 2" (100/box)
|
$13.83 |
SC-KBZS35G |
KERDI BOARD: Course Thread Screw 1-5/8" (200/box)
|
$18.88 |
SC-KBZS75G |
KERDI BOARD: Course Thread Screw 3" (100/box)
|
$21.11 |
SC-KBZS35GT32Z |
KERDI BOARD: Washer & Screw Set (40 of ea.)
|
$15.72 |
SC-KBZS35GT32Z100 |
KERDI BOARD: Washer & Screw Set (100 of ea.)
|
$29.67 |
KERDI BOARD ACCESSORIES:
WASHER & SCREW SET - KERDI-BOARD-ZS are coarse thread screws used to fasten
KERDI-BOARD to wood stud framing with the corresponding washers
- Vertical spacing: 12” (30 cm) o.c.
- Horizontal spacing: 12” (30 cm) or 16” (40.6 cm) o.c.
(dependent on stud spacing)
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-KL1V60E50 |
Kerdi Line 20" Channel Body - Centered Outlet
|
$379.18 |
SC-KL1V60E60 |
Kerdi Line 24" Channel Body - Centered Outlet
|
$391.21 |
SC-KL1V60E70 |
Kerdi Line 28" Channel Body - Centered Outlet
|
$424.94 |
SC-KL1V60E80 |
Kerdi Line 32" Channel Body - Centered Outlet
|
$429.04 |
SC-KL1V60E90 |
Kerdi Line 35" Channel Body - Centered Outlet
|
$448.08 |
SC-KL1V60E100 |
Kerdi Line 39" Channel Body - Centered Outlet
|
$460.58 |
SC-KL1V60E110 |
Kerdi Line 43" Channel Body - Centered Outlet
|
$470.20 |
SC-KL1V60E120 |
Kerdi Line 47" Channel Body - Centered Outlet
|
$429.09 |
SC-KL1V60E130 |
Kerdi Line 51" Channel Body - Centered Outlet
|
$596.33 |
SC-KL1V60E140 |
Kerdi Line 55" Channel Body - Centered Outlet
|
$611.48 |
SC-KL1V60E150 |
Kerdi Line 59" Channel Body - Centered Outlet
|
$626.12 |
SC-KL1V60E160 |
Kerdi Line 63" Channel Body - Centered Outlet
|
$638.24 |
SC-KL1V60E170 |
Kerdi Line 67" Channel Body - Centered Outlet
|
$648.21 |
SC-KL1V60E180 |
Kerdi Line 71" Channel Body - Centered Outlet
|
$659.43 |
SC-KL1VO60E70 |
Kerdi Line 28" Channel Body - Offset Outlet
|
$430.15 |
SC-KL1VO60E80 |
Kerdi Line 32" Channel Body - Offset Outlet
|
$434.32 |
SC-KL1VO60E90 |
Kerdi Line 35" Channel Body - Offset Outlet
|
$454.22 |
SC-KL1VO60E100 |
Kerdi Line 39" Channel Body - Offset Outlet
|
$483.50 |
SC-KL1VO60E110 |
Kerdi Line 43" Channel Body - Offset Outlet
|
$503.11 |
SC-KL1VO60E120 |
Kerdi Line 47" Channel Body - Offset Outlet
|
$527.01 |
The
Schluter®-KERDI-LINE is a low profile linear floor drain specifically designed
for bonded waterproofing
assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in
showers, wet rooms, and other applications that require waterproofing and drainage.
The KERDI-LINE channel body is made of formed stainless steel and features a
collar made of
Schluter®-KERDI for a secure waterproof connection.
*Does NOT
come with KERDI-LINE Grate assembly, that is required and to be purchased seperately.
Comes with:
- 1 x Channel Body
- 1 x Channel Support
- 1 x No-Hub Cuppling
- 4 x KERDI Inside Corners
- 2 x KERDI Outside Corners
- 1 x KERDI Pipe Seal (3/4" - 20mm)
- 1 x KERDI Mixing Valve Seal (4-1/2" - 114mm)
|
Schluter products are available in our
Burnaby branch only.
|
|
|
sf/roll |
pcs/pallet |
lbs/box |
suggested list price |
KERDI |
3'3"x98.5' Kerdi waterproof membrane
| 323 | n/a |
n/a |
$2.36/sf |
Schluter KERDI is a polyethylene, waterproofing membrane equipped on both sides with an anchoring fleece. It is suitable for waterproofing in conjunction with tiles surfaces on walls and floors.
|
|
|
|
suggested list price |
SC-KEBA100/125 |
KEBA — Kerdi Sealing Band [5"x98'5" - 4mil Thickness]
|
$1.33/lf |
SC-KEBA100/125/5M |
KEBA — Kerdi Sealing Band [5"x16'5" - 4mil Thickness] *Sold by Full Roll
|
$27.94 |
SC-KEBA100/125/10M |
KEBA — Kerdi Sealing Band [5"x33' - 4mil Thickness] *Sold by Full Roll
|
$53.08 |
Schluter®-KERDI-BAND is a waterproofing
strip used to seal butt joints and floor/wall connections with KERDI and DITRA
membranes and KERDI-BOARD building panels.
- Ensures a fully water-tight seal preventing leaks and mold
growth
- Adheres tightly to inside and outside corners without rounding
at surface transitions
- 4 mil thickness prevents build-up beneath the tile
|
|
|
|
suggested list price |
SC-KERECK/FI10 |
KERDI CORNERS: Inside (10/pack)
|
$10.61 |
SC-KERECK/FA10 |
KERDI CORNERS: Outside (10/pack)
|
$10.61 |
Schluter®-KERDI-KERECK are
preformed, seamless corners made for waterproofing inside and outside corners
of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.
- Preformed, seamless corners made
of KERDI
- Ensures a fully water-tight seal
at inside and outside corners
- 4-mil thickness minimizes
build-up in corners
- Convenient and easy to install
- Used in conjunction with
KERDI-BOARD, KERDI, DITRA, and DITRA-HEAT
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-E60 |
SCHIENE E: Stainless Steel (1/4")
|
$47.09 |
SC-E80 |
SCHIENE E: Stainless Steel (5/16")
|
$47.51 |
SC-E100 |
SCHIENE E: Stainless Steel (3/8")
|
$48.78 |
SC-E125 |
SCHIENE E: Stainless Steel (1/2")
|
$50.41 |
Schluter®-SCHIENE provides effective and attractive edge protection for tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings. - Prevents tiles from chipping
- Ideal for creating transitions on floors
- Ideal for floor installations, where tile is bordered by carpet or wood
- Features an approximately 1/8" (3 mm)-wide visible surface for discreet transitions
- 87° slope to transfer point loads and protect tile edges
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-E125D |
DECO: Stainless Steel (1/2")
|
$59.88 |
Schluter®-DECO provides
decorative lines within tile coverings and edge protection at transitions from
tile coverings to other same-height surface coverings, such as wood or carpet.
- Prevents tiles from chipping
- Creates decorative lines that
enhance the design of tiled floors
- Ideal for floor installations
where tile is bordered by carpet or other coverings
- Features a ¼” (6 mm)-wide visible
radius for a decorative effect
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-Q60AE |
ANODIZED ALUMINUM: Satin (1/4")
|
$20.88 |
Schluter-QUADEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a square outer corner along the surface edge. In addition, Schluter-QUADEC is suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquet, natural stone tiles, or poured epoxy coverings. The integrated joint spacer forms a defined joint cavity with the tile.
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-A60AM |
ANODIZED ALUMINUM: Satin Brass (1/4")
|
$16.26 |
SC-A80AM |
ANODIZED ALUMINUM: Satin Brass (5/16")
|
$16.86 |
SC-A100AM |
ANODIZED ALUMINUM: Satin Brass (3/8")
|
$17.81 |
BW-60 |
PVC: Bright White (1/4")
|
$5.74 |
BW-80 |
PVC: Bright White (5/16")
|
$6.77 |
BW-100 |
PVC: Bright White (3/8")
|
$7.52 |
BW-125 |
PVC: Bright White (1/2")
|
$7.96 |
SC-A100MGS |
ANODIZED ALUMINUM: Matte Black (3/8")
|
$31.97 |
SC-A125MGS |
ANODIZED ALUMINUM: Matte Black (1/2")
|
$32.95 |
SC-A100MBW |
ANODIZED ALUMINUM: Matte White (3/8")
|
$31.97 |
SC-A125MBW |
ANODIZED ALUMINUM: Matte White (1/2")
|
$32.95 |
SC-A60AGSG |
AC COATED ALUMINUM: Bright Black (1/4")
|
$19.64 |
SC-A80AGSG |
AC COATED ALUMINUM: Bright Black (5/16")
|
$20.59 |
SC-A100AGSG |
AC COATED ALUMINUM: Bright Black (3/8")
|
$21.17 |
SC-A125AGSG |
AC COATED ALUMINUM: Bright Black (1/2")
|
$21.78 |
SC-A60AK |
ANODIZED ALUMINUM: Satin Copper/Bronze (1/4")
|
$17.24 |
SC-A80AK |
ANODIZED ALUMINUM: Satin Copper/Bronze (5/16")
|
$18.40 |
SC-A100AK |
ANODIZED ALUMINUM: Satin Copper/Bronze (3/8")
|
$19.01 |
SC-A125AK |
ANODIZED ALUMINUM: Satin Copper/Bronze (1/2")
|
$20.18 |
SC-A60AT |
ANODIZED ALUMINUM: Satin Nickel (1/4")
|
$16.88 |
SC-A80AT |
ANODIZED ALUMINUM: Satin Nickel (5/16")
|
$17.70 |
SC-A100AT |
ANODIZED ALUMINUM: Satin Nickel (3/8")
|
$18.27 |
SC-A125AT |
ANODIZED ALUMINUM: Satin Nickel (1/2")
|
$19.41 |
SC-A80ATG |
ANODIZED ALUMINUM: Polished Nickel (5/16")
|
$20.80 |
SC-A100ATG |
ANODIZED ALUMINUM: Polished Nickel (3/8")
|
$21.38 |
SC-A125ATG |
ANODIZED ALUMINUM: Polished Nickel (1/2")
|
$21.97 |
SC-A80ATGB |
ANODIZED ALUMINUM: Brushed Nickel (5/16")
|
$20.96 |
SC-A100ATGB |
ANODIZED ALUMINUM: Brushed Nickel (3/8")
|
$22.13 |
SC-A125ATGB |
ANODIZED ALUMINUM: Brushed Nickel (1/2")
|
$23.16 |
Schluter®-SCHIENE provides effective and attractive edge protection for tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings. - Prevents tiles from chipping
- Ideal for creating transitions on floors
- Ideal for floor installations, where tile is bordered by carpet or wood
- Features an approximately 1/8" (3 mm)-wide visible surface for discreet transitions
- 87° slope to transfer point loads and protect tile edges
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
BW-60J |
PVC: Jolly Junior — Bright White (1/4")
|
$3.68 |
BW-80J |
PVC: Jolly Junior — Bright White (5/16")
|
$3.87 |
BW-110J |
PVC: Jolly Junior — Bright White (7/16")
|
$4.25 |
W-60 |
PVC: Jolly-P —White (1/4")
|
$5.74 |
W-80 |
PVC: Jolly-P — White (5/16")
|
$6.77 |
W-100 |
PVC: Jolly-P — White (3/8")
|
$7.52 |
BW-60 |
PVC: Jolly-P — Bright White (1/4")
|
$5.74 |
BW-80 |
PVC: Jolly-P — Bright White (5/16")
|
$6.77 |
BW-100 |
PVC: Jolly-P — Bright White (3/8")
|
$7.52 |
BW-125 |
PVC: Jolly-P — Bright White (1/2")
|
$7.96 |
Schluter®-JOLLY JUNIOR & JOLLY-P finishes and protects outside wall corners and other tiled edges (Ex: tiled skirting). The integrated spacer creates a channel for grouting the tile. [*PVC PROFILES]
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-ABA80AE |
BASIC: Satin Aluminum (5/16")
|
$10.65 |
SC-ABA100AE |
BASIC: Satin Aluminum (3/8")
|
$11.15 |
SC-ABA125AE |
BASIC: Satin Aluminum (1/2")
|
$11.59 |
SC-ABA80AT |
BASIC: Satin Nickel (5/16")
|
$13.27 |
SC-ABA100AT |
BASIC: Satin Nickel (3/8")
|
$13.72 |
SC-ABA125AT |
BASIC: Satin Nickel (1/2")
|
$14.55 |
Schluter®-SCHIENE provides
effective and attractive edge protection for tile coverings that are typically
bordered by carpet, at expansion joints, or as decorative edging for stairs.
The profile offers a discreet, minimum reveal which is ideal for creating
elegant transitions between floor coverings.
- Prevents tiles from chipping
- Ideal for creating transitions on
floors
- Ideal for floor installations,
where tile is bordered by carpet or wood
- Features an approximately
1/8" (3 mm)-wide visible surface for discreet transitions
- 87° slope to transfer point loads
and protect tile edges
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-T9/14AE |
ANODIZED ALUMINUM: Satin (11/32"H x 9/16"W)
|
$14.67 |
Schluter®-RENO-T is designed to
provide transitions between existing, same-height, hard surface floor
coverings, primarily in retrofit applications (e.g., ceramic or natural stone,
parquet flooring, concrete pavers, laminate, etc).
- Prevents tile edges from chipping
- Ideal for floor installations
where tile is bordered by wood, laminate, or other hard floor coverings
- Designed for floor transitions in
retrofit applications
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-RO60AE |
ANODIZED ALUMINUM: Satin (1/4")
|
$19.00 |
SC-RO80AE |
ANODIZED ALUMINUM: Satin (5/16")
|
$20.38 |
SC-RO100AE |
ANODIZED ALUMINUM: Satin (3/8")
|
$21.24 |
SC-RO60ACG |
ANODIZED ALUMINUM: Polished Chrome (1/4")
|
$22.89 |
SC-RO80ACG |
ANODIZED ALUMINUM: Polished Chrome (5/16")
|
$24.30 |
Schluter®-RONDEC is a finishing
and edge-protection profile for tiled edges and outside corners of tiled
surfaces. The reveal of the profile forms a symmetrically rounded corner along
the surface edge.
- Prevents tile edges from chipping
- Ideal for color coordination for
tile and grout
- Creates beautiful accents and
decorative designs
- Features an integrated joint
spacer that creates a defined joint cavity between the tile and profile
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
AEU-80 |
ANODIZED ALUMINUM: Satin (5/16")
|
$23.50 |
AEU-100 |
ANODIZED ALUMINUM: Satin (3/8")
|
$24.75 |
AEU-125 |
ANODIZED ALUMINUM: Satin (1/2")
|
$32.69 |
MU-80 |
SOLID: Brass (5/16")
|
$70.80 |
MU-100 |
SOLID: Brass (3/8")
|
$79.61 |
SC-AU80AT |
ANODIZED ALUMINUM: Satin Nickel (5/16")
|
$23.82 |
SC-AU100AT |
ANODIZED ALUMINUM: Satin Nickel (3/8")
|
$26.15 |
SC-AU125AT |
ANODIZED ALUMINUM: Satin Nickel (1/2")
|
$33.98 |
Schluter®-RENO-U is designed to
protect tile edges and provide a smooth transition between tile coverings and
floor coverings at lower elevations by abutting both surfaces.
- Prevents tile edges from chipping
- Creates smooth transitions to
eliminate trip hazards
- Ideal for transitions from tile
coverings to finished concrete
- Certain sizes are ADA-compliant
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
AE-TK80 |
ANODIZED ALUMINUM: Satin (5/16")
|
$21.64 |
AE-TK100 |
ANODIZED ALUMINUM: Satin (3/8")
|
$23.62 |
AE-TK125 |
ANODIZED ALUMINUM: Satin (1/2")
|
$30.58 |
SC-ATK80AT |
ANODIZED ALUMINUM: Satin Nickel (1/2")
|
$24.93 |
SC-ATK100AT |
ANODIZED ALUMINUM: Satin Nickel (3/8")
|
$30.20 |
SC-ATK125AT |
ANODIZED ALUMINUM: Satin Nickel (5/16")
|
$33.98 |
Schluter®-RENO-TK is designed to protect tile edges and
provide a smooth transition from tile coverings to floor coverings at lower
elevations, typically carpet.
- Prevents tile edges from chipping
- Typically used to create transitions between tile coverings
and carpet at lower elevations
- The 1/4" (6 mm)-wide channel beneath the sloped flange
protects and hides the carpet edge
- ADA-compliant
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
REMA |
REMA: Tile Magnet & Counter Plate (4pce set)
|
$14.01 |
Schluter®-REMA is the ideal
system for creating concealed access panels in tiled wall coverings. REMA’s
installation is independent of tile size and thickness and enables exact
matching of the access panel to the overall joint design. Thus, panels that access
electrical or plumbing components do not impair the visual appearance of the
tile covering.
|
|
|
|
suggested list price |
SC-SES2D5EB |
SHELF-E: Pentagonal Corner (Brushed Stainless Steel) | Floral
|
$139.98 |
SC-SES2D6EB |
SHELF-E: Pentagonal Corner (Brushed Stainless Steel) | Curve
|
$133.90 |
SC-SES1D5EB |
SHELF-E: Triangular Corner (Brushed Stainless Steel) | Floral
|
$139.98 |
SC-SES1D6EB |
SHELF-E: Triangular Corner (Brushed Stainless Steel) | Curve
|
$133.90 |
SC-SES3D5EB |
SHELF-E: Quadrilateral Corner (Brushed Stainless Steel) | Floral
|
$188.66 |
SC-SES3D6EB |
SHELF-E: Quadrilateral Corner (Brushed Stainless Steel) | Curve
|
$188.66 |
SC-SNS1D5EB |
SHELF-N: Niche Shelf (Brushed Stainless Steel) | Floral
|
$158.23 |
SC-SNS1D6EB |
SHELF-N: Niche Shelf (Brushed Stainless Steel) | Curve
|
$158.23 |
SC-SWS1D5EB |
SHELF-W: Wall Shelf (Brushed Stainless Steel) | Floral
|
$164.33 |
SC-SWS1D6EB |
SHELF-W: Wall Shelf (Brushed Stainless Steel) | Curve
|
$158.23 |
SC-SES2D5MGS |
SHELF-E: Pentagonal Corner (Matte Black) | Floral
|
$124.43 |
SC-SES2D6MGS |
SHELF-E: Pentagonal Corner (Matte Black) | Curve
|
$115.13 |
SC-SES1D5MGS |
SHELF-E: Triangular Corner (Matte Black) | Floral
|
$109.31 |
SC-SES1D6MGS |
SHELF-E: Triangular Corner (Matte Black) | Curve
|
$102.34 |
SC-SES3D5MGS |
SHELF-E: Quadrilateral Corner (Matte Black) | Floral
|
$144.20 |
SC-SES3D6MGS |
SHELF-E: Quadrilateral Corner (Matte Black) | Curve
|
$130.24 |
SC-SNS1D5MGS |
SHELF-N: Niche Shelf (Matte Black) | Floral
|
$123.27 |
SC-SNS1D6MGS |
SHELF-N: Niche Shelf (Matte Black) | Curve
|
$116.29 |
SC-SWS1D5MGS |
SHELF-W: Wall Shelf (Matte Black) | Floral
|
$143.03 |
SC-SWS1D6MGS |
SHELF-W: Wall Shelf (Matte Black) | Curve
|
$119.78 |
Schluter®-SHELF
Solid stainless steel with brushed finish shower shelf in
quadrilateral, pentagonal and triangular corner shapes, plus niche and wall
shelves.
- For new or retrofit installations
- Installation without drilling by integration into the joint
pattern
Installation - SHELF-E via 3/32" thick anchoring tabs
- SHELF-N installed in conjunction w/tile, fits prefabricated Kerdi Board-SN shower niche
- SHELF-W installed without drilling by integration into the joint
pattern via double anchoring leg for simplified tandem tile installation
|
Schluter products are available in our
Burnaby branch only.
|
|
|
suggested list price |
SC-SET50G |
SCHLUTER 'SET' - Unmodified Mortar Grey 50lb
|
$30.50 |
SC-SET50W |
SCHLUTER 'SET' - Unmodified Mortar White 50lb
|
$33.00 |
SC-SETA50G |
SCHLUTER 'ALL SET' - Modified Mortar Grey 50lb
|
$54.40 |
SC-SETA50W |
SCHLUTER 'ALL SET' - Modified Mortar White 50lb
|
$57.65 |
All Schluter-Systems’ thin-set
mortars, including the ALL-SET modified mortar can be used to set tile over
Schluter®-DITRA, DITRA-HEAT, KERDI, and KERDI-BOARD products. Made right here
in North America, Schluter thin-set mortars are formulated to ensure that you,
the installer, get consistent and steadfast results with respect to
sag-resistance, texture, and workability.
|