Better Bench Bath/Shower Shelving
Better Bench is an easy to install bench-forming system that replaces the complex methods currently in use. This fully independent supporting unit can be mounted to most vertical surfaces quickly and efficiently, saving the installer valuable time. What once took days can now be done in about an hour! Products listed below are produced of an alloyed aluminum and are sent as one piece. All products are supplied with hollow wall anchors and wood screws. Fastening to studs, blocking or other framing members is not required. If framing members are encountered, discard hollow wall anchor and use provided screw with an appropriate pilot hole.
Safe – Engineered 400 lb load capacity on all bench products.
Flexible – Install before or after finish tile is applied to vertical surfaces
Adaptable – Use in wet or dry locations.
Quick – Takes only minutes to mount, place mortar mix (sand & cement), and tile as desired.
Curb Blocks Inc. – Easy Bench & Seat
Easy Bench & Easy Seat corners are pre-fabricated styrofoam benches designed for use in shower applications.
Easy Bench & Easy Seat can accept any finish surface product normally used in showers and wet areas.
Installed over the shower pan or liner so the moisture stays in the pan & flows into the drain.
Not comprimised when introduced to moisture & does not expand or contract with normal humidity & temperature changes.
Pre-sloped on the top surface to shed any moisture onto the shower floor.
Easy Bench & Easy Seat corners are pre-fabricated styrofoam benches designed for use in shower applications.
Easy Bench & Easy Seat can accept any finish surface product normally used in showers and wet areas.
Installed over the shower pan or liner so the moisture stays in the pan & flows into the drain.
Not comprimised when introduced to moisture & does not expand or contract with normal humidity & temperature changes.
Pre-sloped on the top surface to shed any moisture onto the shower floor.
Recess-It Bath/Shower Shelving
Recess-It – Products are produced of a corrosion resistant alloyed aluminum with an elastomeric-waterproofing and anti-fracture coating combined with an aggregate bonding base. Finished materials, ceramic tile, marble, granite, etc. can be applied immediately after product installation utilizing standard mastics or thin-set. Listed products are supplied with wall fasteners which may be used with/without preinstalled wood blocking.
Note – picture shown with optional floating shelf purchased seperately. Approximate pre-finished dimensions (features rolled flange for any style trim use):
face: 13 1/4" x 17 1/4"
back: 12 3/4" 16 3/4"
depth: 3 7/8"
Approximate pre-finished dimensions at (features rolled flange for any style trim use):
face: 13 1/4" x 13 1/4"
back: 12 3/4" 12 3/4"
depth: 3 7/8"
Approximate pre-finished dimensions at (features rolled flange for any style trim use):
face: 6 1/4" x 13 1/4"
back: 5 3/4" x 12 3/4"
depth: 3 7/8"
Approximate pre-finished dimensions at (features rolled flange for any style trim use):
face: 6 1/4" x 4 3/4"
back: 5 3/4" x 4"
depth: 3 7/8"
To be used with any recess-it shelves, some sizes may require cutting.
length: 13"
depth: 3 1/4"