• 1x Kerdi-Shower-T/-TS/-TT Shower Tray
• 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
• 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
• 1x Kerdi-Band Waterproofing Strip 5"x33'
• 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
• 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
• 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
• 1x Kerdi-Seal-PS Pipe Seal [3/4" – 20mm]
• 1x Kerdi-Seal-MV Mixing Valve Seal

• 1x Kerdi-Shower-T/-TS/-TT Shower Tray
• 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
• 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
• 1x Kerdi-Band Waterproofing Strip 5"x33'
• 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
• 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
• 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
• 1x Kerdi-Seal-PS Pipe Seal [3/4" – 20mm]
• 1x Kerdi-Seal-MV Mixing Valve Seal

• 1x Kerdi-Shower-T/-TS/-TT Shower Tray
• 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
• 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
• 1x Kerdi-Band Waterproofing Strip 5"x33'
• 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
• 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
• 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
• 1x Kerdi-Seal-PS Pipe Seal [3/4" – 20mm]
• 1x Kerdi-Seal-MV Mixing Valve Seal

• 1x Kerdi-Shower-T/-TS/-TT Shower Tray
• 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
• 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
• 1x Kerdi-Band Waterproofing Strip 5"x33'
• 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
• 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
• 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
• 1x Kerdi-Seal-PS Pipe Seal [3/4" – 20mm]
• 1x Kerdi-Seal-MV Mixing Valve Seal

• 1x Kerdi-Shower-T/-TS/-TT Shower Tray
• 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
• 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
• 1x Kerdi-Band Waterproofing Strip 5"x33'
• 1x Kerdi-Drain-Flange, PVCFlange w/2" [50mm] Outlet
• 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
• 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
• 1x Kerdi-Seal-PS Pipe Seal [3/4" – 20mm]
• 1x Kerdi-Seal-MV Mixing Valve Seal

• 1x Kerdi-Shower-T/-TS/-TT Shower Tray
• 2x Kerdi-Shower-SC Shower Curb 38"x6"4-1/2"
• 1x Kerdi 10m Waterproofing Membrane 3'3"x33'=108ft
• 1x Kerdi-Band Waterproofing Strip 5"x33'
• 1x Kerdi-Drain-Flange, ABS Flange w/2" [50mm] Outlet
• 4x Kerdi-Kereck-F Preformed Waterproofing Inside Corners
• 2x Kerdi-Kereck-F Preformed Waterproofing Outside Corners
• 1x Kerdi-Seal-PS Pipe Seal [3/4" – 20mm]
• 1x Kerdi-Seal-MV Mixing Valve Seal

Schluter®-KERDI-SHOWER-SC is a lightweight, prefabricated shower curb specifically designed to integrate with the Schluter®-Shower System.

• Designed to integrate with the Schluter®-Shower System
• Load-bearing to accommodate the weight of glass blocks, shower doors, and glass partitions
• The height and length of the shower curb can be easily cut to size; multiple curbs can also be installed adjacent to each other for larger showers
• Quick and easy to install
• Made of lightweight, expanded polystyrene

Schluter®-KERDI-BOARD-SN is a prefabricated shower niche that is fully sealed, quick to install, and integrates with KERDI and KERDI-BOARD shower assemblies. The larger niche sizes include a KERDI-BOARD shelf that can be installed at any height to create separate compartments within the niche.

• Fully waterproof and vapor-tight
• Features sealed inside corners for effective waterproofing
• To enhance its appearance, frame the niche using select Schluter® profiles
• Larger sizes include a prefabricated, adjustable KERDI-BOARD shelf
• Available in four different sizes

Schluter®-KERDI-BOARD-SB is a lightweight, waterproof, prefabricated shower bench made of KERDI-BOARD that is designed to integrate with the Schluter®-Shower System.

• Designed to integrate with the Schluter®-Shower System
• Lightweight, stable, and load bearing
• Waterproof and ready to tile
• Sloped surface to prevent water accumulation
• Quick and easy to install
• The triangular bench includes preformed 135° KERDI-KERECK inside corners, as well as right and left KERDI-KERS-B bench corners to simplify waterproofing connections at the wall
• The rectangular bench includes 2 of each preformed 90° inside and outside KERDI-KERECK corners to simplify waterproofing connections at the wall

Schluter®-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used in bonded waterproofing assemblies with tile. KERDI-BOARD allows you to quickly and easily build tile-ready elements in showers, bathtub surrounds and platforms, countertops, vanities, shelving, and more!

• Fosters creativity in the construction of bonded waterproofing assemblies to be tiled
• Build custom vanities, shelving units, countertops, bathtub surrounds, and so much more
• Replaces other suitable solid backing panels (i.e. gypsum board, cement backer board)
• Even, impact-resistant, and rigid
• Waterproof, thermally insulating and dimensionally stable
• Lightweight, easy to handle and transport
• Contains no cement or fiberglass for a dust-free installation
• Extruded polystyrene foam panel
• Fleece webbing for effective bonding of tile to the surface

The Schluter®-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage. The KERDI-LINE channel body is made of formed stainless steel and features a collar made of Schluter®-KERDI for a secure waterproof connection.

 *Does NOT come with KERDI-LINE Grate assembly, that is required and to be purchased seperately.

Comes with:

• 1 x Channel Body
• 1 x Channel Support
• 1 x No-Hub Cuppling
• 4 x KERDI Inside Corners
• 2 x KERDI Outside Corners
• 1 x KERDI Pipe Seal (3/4" – 20mm)
• 1 x KERDI Mixing Valve Seal (4-1/2" – 114mm) 

Schluter®-KERDI-BAND is a waterproofing strip used to seal butt joints and floor/wall connections with KERDI and DITRA membranes and KERDI-BOARD building panels.

• Ensures a fully water-tight seal preventing leaks and mold growth
• Adheres tightly to inside and outside corners without rounding at surface transitions
• 4 mil thickness prevents build-up beneath the tile

Schluter®-KERDI-KERECK are preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.

• Preformed, seamless corners made of KERDI
• Ensures a fully water-tight seal at inside and outside corners
• 4-mil thickness minimizes build-up in corners
• Convenient and easy to install
• Used in conjunction with KERDI-BOARD, KERDI, DITRA, and DITRA-HEAT

Schluter®-SCHIENE provides effective and attractive edge protection for tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.

• Prevents tiles from chipping
• Ideal for creating transitions on floors
• Ideal for floor installations, where tile is bordered by carpet or wood
• Features an approximately 1/8" (3 mm)-wide visible surface for discreet transitions
• 87° slope to transfer point loads and protect tile edges

Schluter®-DECO provides decorative lines within tile coverings and edge protection at transitions from tile coverings to other same-height surface coverings, such as wood or carpet.

• Prevents tiles from chipping
• Creates decorative lines that enhance the design of tiled floors
• Ideal for floor installations where tile is bordered by carpet or other coverings
• Features a ¼” (6 mm)-wide visible radius for a decorative effect

Schluter®-SCHIENE provides effective and attractive edge protection for tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.

• Prevents tiles from chipping
• Ideal for creating transitions on floors
• Ideal for floor installations, where tile is bordered by carpet or wood
• Features an approximately 1/8" (3 mm)-wide visible surface for discreet transitions
• 87° slope to transfer point loads and protect tile edges

Schluter®-SCHIENE provides effective and attractive edge protection for tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.

• Prevents tiles from chipping
• Ideal for creating transitions on floors
• Ideal for floor installations, where tile is bordered by carpet or wood
• Features an approximately 1/8" (3 mm)-wide visible surface for discreet transitions
• 87° slope to transfer point loads and protect tile edges

Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).

• Prevents tile edges from chipping
• Ideal for floor installations where tile is bordered by wood, laminate, or other hard floor coverings
• Designed for floor transitions in retrofit applications

Schluter®-RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge.

• Prevents tile edges from chipping
• Ideal for color coordination for tile and grout
• Creates beautiful accents and decorative designs
• Features an integrated joint spacer that creates a defined joint cavity between the tile and profile 

Schluter®-RENO-U is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations by abutting both surfaces.

• Prevents tile edges from chipping
• Creates smooth transitions to eliminate trip hazards
• Ideal for transitions from tile coverings to finished concrete
• Certain sizes are ADA-compliant

Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.

• Prevents tile edges from chipping
• Typically used to create transitions between tile coverings and carpet at lower elevations
• The 1/4" (6 mm)-wide channel beneath the sloped flange protects and hides the carpet edge
• ADA-compliant

Schluter®-REMA is the ideal system for creating concealed access panels in tiled wall coverings. REMA’s installation is independent of tile size and thickness and enables exact matching of the access panel to the overall joint design. Thus, panels that access electrical or plumbing components do not impair the visual appearance of the tile covering.

Schluter®-SHELF

Solid stainless steel with brushed finish shower shelf in quadrilateral, pentagonal and triangular corner shapes, plus niche and wall shelves.

• For new or retrofit installations
• Installation without drilling by integration into the joint pattern 

• SHELF-E  via 3/32" thick anchoring tabs
• SHELF-N installed in conjunction w/tile, fits prefabricated Kerdi Board-SN shower niche
• SHELF-W installed without drilling by integration into the joint pattern via double anchoring leg for simplified tandem tile installation

All Schluter-Systems’ thin-set mortars, including the ALL-SET modified mortar can be used to set tile over Schluter®-DITRA, DITRA-HEAT, KERDI, and KERDI-BOARD products. Made right here in North America, Schluter thin-set mortars are formulated to ensure that you, the installer, get consistent and steadfast results with respect to sag-resistance, texture, and workability.