|
 |
|
back to top |
|
|
|
|
|
|
|
|
|
sf/box |
sf/pallet |
lbs/box |
| BW-POL-CSP |
Polystick anti-fracture membrane – 39-3/8″ x 807″ |
220 |
4400 |
65.33 |
| BW-POL-PR1 |
Polystick water based primer – 1 ltr |
1 pce |
N/A |
2.50 |
|
| CSP (Crack & Sound Protection) Membrane is a homogeneous, rubberized asphalt based waterproofing compound with a reinforced polyester fabric surface designed specifically for use as a Crack & Sound Protection membrane beneath flooring tile, stone, hardwood floors, radiant heated floors and other areas where cracking floors or sound transmission could pose problems. This tough reinforced membrane provides an ideal bugger to subfloor movement and cracking, up to 1/4 inch. Split release backing film aids in easy positioning of sheets to maintain a proper line.
|
| |
|
|
|
|
|
|
|
back to top |
|
|
|
|
|
|
|
|
|
sf/roll |
| DITRA-30 |
Ditra uncoupling & waterproof membrane – 39″x1181″ |
320 |
|
|
| Schluter Ditra is an uncoupling and waterproofing membrane that is recommended for any even and load-bearing substrates such as: plywood and OSB; 24″ o.c. truss and I-joist systems; green concrete; gypsum-based screeds; pre-stressed and post-tensioned concrete; and radiant-heated floors. For most tile installations, Schluter Ditra eliminates the need for a second layer of plywood or for the use of cementitious backerboard. Schluter Ditra ensures a lasting installation by allowing independent movement between the tile covering and the substrate. This eliminates the transfer of stresses from the substrate to the tile covering. In addition, Schluter Ditra is lighter, thinner, and easier to apply than any other underlayment.
|
| |
|
|
|
|
|
|
|
|
|
| SC-KEBA100/125 |
Keba sealing band (4mm thickness / 5″ width x 98.5′ length) |
|
|
|
| Schluter Keba is a waterproofing strip used to seal butt joints and floor/wall connections with the Schluter Kerdi and Schluter Ditra mattings.
|
| |
|
|
|
|
|
|
|
back to top |
|
|
|
|
|
|
|
|
|
pcs/box |
lbs/box |
| SP-80R32 |
SuperiorBilt Tools underlayment roller |
4 |
12 |
|
| Essential for installation of underlayments, SuperiorBilt underlayment roller ensures proper adhesion by removing air pockets and smoothing out the surface. The handle is adjustable from 18″ to 32″ in length and comes with no scuff, non-marking rollers.
|
| |
|
|
|
|
|
|
|
back to top |
|
|
|
|
|
|
|
|
|
sf/roll |
| KERDI |
3’3″x98.5′ Kerdi waterproof membrane |
320 |
|
|
| Schluter KERDI is a polyethylene, waterproofing membrane equipped on both sides with an anchoring fleece. It is suitable for waterproofing in conjunction with tiles surfaces on walls and floors.
|
| |
|
|
|
|
|
|
|
|
|
| SC-KEBA100/125 |
Keba sealing band (4mm thickness / 5″ width x 98.5′ length) |
|
|
|
| Schluter Keba is a waterproofing strip used to seal butt joints and floor/wall connections with the Schluter Kerdi and Schluter Ditra mattings.
|
| |
|
|
|
|
|
|
|
back to top |
|
|
|
|
|
|
|
|
|
pcs/box |
pcs/pallet |
lbs/box |
| CLQWAF-1G |
1 gal. Waterproof & Anti-fracture membrane |
2 |
N/A |
20 |
| CLQWAF-5G |
5 gal. Waterproof & Anti-fracture membrane |
1 |
N/A |
52 |
|
Ready-to-use, elastomeric, waterproofing and anti-fracture membrane for all interior or exterior commercial and residential tile and stone installations. Easily applied with roller, trowel or sprayer producing a continuous moisture barrier with outstanding adhesion. Reduces crack transmission in ceramic tile or stone floors. Meets ANSI 118.10 for waterproofing membranes. Meets IAPMO/Uniform Pluming Code File No. 4244 specifications for uses as a shower pan liner. Can also be used as a slab-on-grade moisture barrier under resilient or wood flooring.
Click here for data sheet
|
| |
|
|
|
|