Stone/Tile Saws & Polishers | Menu :  
  • MK-70
  • MK-145
  • MK-370EXP
  • MK-100
  • MK-101PRO
  • MK-212
  • MK-1503
  • MK-164800 (TX3)
    • MK-70 back to top
    		MK-70 Features:
    • Adjustable base allows the operator to change both the cutting depth and cutting angle.
    • Suitable for dry cutting concrete, block & stucco.
    • Easy to use ON/OFF trigger switch and locking button.
    • One-year limited warranty.

      Saw Includes:
    • 4″ 304CR Dry cutting diamond blade.
    • Wrenches.
    Motor: 115v 60hz
    Watts: 1050
    RPM: 11,000
    Blade Capacity: 4″ (102mm)
    Arbor Size: 20mm
    Depth of Cut: 1-1/8″ (28mm)
    Depth of Cut at 45 Degrees: 1″ (25mm)
    Weight: 7 lbs (3.2kgs)
    Size LxWxH (inches): 10″ x 8″ x 6.5″
    Size (mm): 254 x 203 x 165
    MK-145 back to top
      Accessories Included:
    • Precision rip guide.
    • 45 degree rip guide for diagonal cuts.
    • 4-1/2″ Diamond blade included.
    		 MK-145 Features:
    • Light weight and compact wet cutting tile & marble saw.
    • Powerful high-torque universal motor.
    • Cuts large size ceramic and stone tiles.
    • Will cut tiles up to 1″ thick.
    • Built in 45 degree miter table.
    • MK-Safeswitch prevents saw from being operated when locking key is removed.
    • Internal cord storage.
    • Detachable table stop prevents saw from moving away from operator when in use.
    • One year limited warranty.
    Motor: 115v
    Horsepower: 1/2 hp
    RPM: 5,500
    Blade Capacity: 4-1/2″ (114mm)
    Depth of Cut: 1″ (25mm)
    Weight: 12lbs (5.4kgs)
    Size LxWxH (inches): 17.5″ x 16″ x 7″
    Size (mm): 445 x 406 x 178
    MK-370EXP back to top
      Accessories Included:
    • 7″ MK-225 Hot Dog blade.
    • Water pump.
    • Adjustable Rip Guide.
    		 MK-370EXP Features:
    • Tilting head allows for precise 45 degree miter cuts.
    • Sliding aluminum die-cast cutting table rips 18″ tile.
    • Powerful high-torque universal motor.
    • Maintenance-free, self-lubricating pinion and gear-box assembly.
    • 3/4″ diameter chrome-plated linear guide-bar system.
    • Heavy duty on/off switch.
    • Built-in water pump receptacle.
    • Hinged blade guard for easy blade changes.
    • Single piece zinc-plated steel frame provides rigidity, strength and durability.
    • Removable thermoplastic water reservoir.
    • MK-Safeswitch prevents saw from being operated when locking key is removed.
    • One year limited warranty.
    Motor: 115v / 60hz
    RPM: 5,500
    Horsepower: 1-1/4 hp
    Blade Capacity: 7″ (178mm)
    Arbor Size: 5/8″ (16mm)
    Length of Cut: 18″
    Diagnolly Cuts: 13″
    Depth of Cut: 2″ (51mm)
    Depth of Cut at 45 Degrees: 1-1/8″ (32mm)
    Weight: 33lbs (15kgs)
    Size LxWxH (inches): 33″ x 19″ x 20″
    Size (mm): 838 x 483 x 508
    MK-100 back to top
      Accessories Included:
    • 10″ MK-200 wet cutting diamond blade.
    • Water pump.
    • Adjustable rip guide.
    • Drain plug.
    • Stand.
    		 MK-100 Features:
    • 1-1/2 hp motor.
    • Two position cutting head for greater versatility in cutting various tile sizes.
    • Blade shaft lock for easy blade removal.
    • Chrome-plated linear guide-bar system ensures precision alignment & accurate cutting.
    • Cast-aluminum blade guard with built-in water
      distribution system supplies water to both sides of blade.
    • Variable height cutting head allows for plunge cutting and use of blades smaller than 10″ diameter.
    • Blade guard accomodates 6″ and 8″ profile wheels.
    • Micro V-belt drive.
    • One year limited warranty.
    Motor: 115v 60hz
    Horsepower: 1-1/2hp
    RPM: 3,450
    Blade Capacity: 10″ (254mm)
    Diagnolly Cuts: 14″ Tile
    Depth of Cut: 3-3/4″ (96mm)
    (with 10″ blade)
    Length of Cut: 20″ (508mm)
    Weight: 96lbs (43.5kgs)
    Size LxWxH (inches): 36″ x 21.5″ x 22.5″
    Size (mm): 915 x 546 x 572
    MK-101PRO back to top
      Accessories Included:
    • 10″ continuous rim tile blade.
    • Submersible water pump.
    • Rip guide & 45 degree miter.
    • Extended cutting table.
    • Side extension table.
    • Stand.
    		 MK-101PRO Features:
    • Engineered for versatility, durability and precision cutting of tile & marble.
    • Fully enclosed fan-cooled high torque motor.
    • Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings.
    • Two-position cutting head for operator convenience in cutting various tile sizes.
    • Chrome plated guide-bar and linear-bearing assembly ensures precise alignment and precision cutting.
    • Cast-aluminum blade guard with built-in water distribution system supplies water to both sides of blade.
    • Variable height cutting head allows for plunge cutting and use of blades smaller than 10″ in diameter.
    • Blade guard accomodates 6″ and 8″ profile wheels.
    • One-piece reinforced zinc-plated steel frame.
    • 30 amp on/off switch.
    • One year limited warranty.
    Motor: 115v 60hz
    Horsepower: 2 hp
    RPM: 3,450
    Blade Capacity: 10″ (254mm)
    Arbor Size: 5/8″ (16mm)
    Length of Cut: 20″ (508mm)
    Weight: 103lbs (46.7kgs)
    Size LxWxH (inches): 36″ x 21.5″ x 22.5″
    Size (mm): 915 x 546 x 572
    Depth of Cut: 3-3/4″ (96mm)
    Diagnolly Cuts: 14″ tile
    MK-212 back to top
      Accessories Included:
    • 10″ MK-415 Diamond blade.
    • 12″ Adjustable cutting guide.
    • Water pump.
    		 MK-212 Features:
    • Plunge cut capability for scoring or cutting large tile.
    • Fully-adjustable tilting head allows easy and precise 45 degree miter cuts up to 1-3/4″ deep.
    • Blade guard accommodates 10″ profile wheels.
    • Pivoting blade guard for easy blade changes.
    • Cutting head is mounted on a roller-bearing carriage running on a stainless steel rail.
    • Friction locks on both head height adjustment and carriage travel.
    • Constructed with powder coated heavy-gauge sheet metal and cast aluminum components.
    • 1/4″ thick replaceable rubber cutting surface & built in removable stand.
    • one year limited warranty.
    Motor: 115v / 60hz
    Amperage: 14 Amp
    RPM: 3,400
    Horsepower: 1-1/2 hp (direct drive)
    Blade Capacity: 10″ (254mm)
    Arbor Size: 5/8″ (16mm)
    Length of Cut: 36″ (914mm)
    Diagnolly Cuts: 24″ (609 mm) tile
    Depth of Cut: 3″ (76mm)
    Depth of Cut at 45 Degrees: 1-3/4″ (44mm)
    Power Cord: 10′ / 12gauge
    Weight: 226lbs (103kgs)
    Size LxWxH (inches): 58″ x 20.5″ x 52″
    (including stand)
    Size (mm): 1473 x 521 x 1321
    MK-1503 back to top
      Accessories Included:
    • Inline GFCI switch.
    • Shaft wrench.
    		 MK-1503 Features:
    • Engineered for performace and durability, the MK-1503 is the industry standard wet stone polisher. When matched with MK polishing pads, this tool polishes marble and granite to professional standards.
    • Durable universal motor operates on standard house current.
    • Compact tool with ergonomically designed sure-grip handle.
    • Quick release 1/2″ brass coupling and adjustable water valve.
    • Spindle lock for easy backing pad changes
    • one year limited warranty
    Motor: 150v 50/60hz
    Watts: 800
    RPM: 3,600
    Pad Diameter: 4″ (114mm)
    Weight: 4.4 lbs (2.0 kgs)
    MK-164800 (TX3) back to top
      Accessories Included:
    • 10″ Wet Cutting Diamond Blade
    • Water Pump
    • Rip Guide
    • Side Table

    • Stand not included
    		 MK-164800 (TX3) Features:
    • Misting system significantly reduces amount of dust during cutting
    • Built-in fully adjustable miter system for precise 45ยบ angle cuts
    • 55 psi pump delivers an extra fine water spray to both sides of the blade for cooling and dust control
    • Variable height cutting head allows for plunge cutting and use of blades smaller than 10″ in diameter
    • Maintenance free guide bar system eliminates the need for regular lubrication
    • Hinged blade guard for easy blade changes and maintenance inspection
    • 10″ wet cutting continuous rim blade included
    • One-year limited warranty


    Motor: 120v
    Horsepower: 1-3/4 hp
    RPM: 3,500
    Blade Capacity: 10″ (2548mm)
    Arbor Size: 1″ (26mm)
    Depth of Cut: 3-1/2″ (89mm)
    Depth of Cut at 45 Degrees: 2-3/8″ (60mm)
    Length of Cut: 24″ (610mm)
    Weight: 85 lbs. (39kg)
    Size LxWxH (inches): 44″ x 25″ x 20″
    Size (mm): 1118 x 635 x 508
    Property of Euro Ceramic Tile Distributors © All Rights Reserved    
    Created By GreatMediaEtc.com